Valor Fires 842 Instrukcja Użytkownika Pobierz pdf (Strona 57)

OWNER GUIDE

Figure 8. Window removal

2. Replace in the reverse order.

Ceramic fuel effect pieces and burner compartment walls.

To gain access to the ceramic components the window assembly must be removed as

in the previous section.

It will not be possible to remove the ceramic compartment walls or ceramic front coal

for cleaning. These must be cleaned in situ.

This product uses fuel effect pieces and burner compartment walls containing

Refractory Ceramic Fibres (RCF), which are man-made vitreous silicate fibres.

Excessive exposure to this material may cause irritation to eyes, skin and

respiratory tract. Consequently, it is important to take care when handling these

articles to ensure that the release of dust is kept to a minimum.

- Light coatings of soot will usually be burnt off during the normal operation of the fire.

Should any soot accumulation become excessive, the one piece overlay coal and

ceramic fuel effect base should be removed from the fire for cleaning. It will not be

possible to remove the ceramic compartment walls or ceramic front coal for cleaning.

These must be cleaned in situ.

- Cleaning should be carried out in a well ventilated area or in the open air by gently

brushing with the pieces held away from your face so that you avoid inhaling the dust.

- We do not recommend the use of a normal domestic vacuum cleaner which may

blow dust back into the air.

- We suggest that you remove the ceramic fuel effect pieces in the reverse order to

that shown in the ceramic fuel effect installer and owner guide.

- Once cleaned replace the fuel effect as in ceramic fuel effect installer and owner

guide.

Page 57

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 65 66

Brak uwag

Valor Fires 842 Instrukcja Użytkownika Strona 57